Scientists are modifying a standard 3D printer to build 100-layer structures from living bacteria

In context: In many ways, a bioprinter is simply a 3D printer that extrudes gels containing living cells instead of melted plastic. However, commercial models can easily cost more than $100,000, prompting some labs to convert inexpensive hobbyist 3D printers into bioprinters themselves. However, because the soft gel tends to sag before it solidifies, most of these DIY machines were limited to printing fewer than 20 layers.

Now a team from the University of Rochester and Cornell University has built a device that can stack about 100 layers for about $450. In a study published in ACS Applied Polymer Materials, researchers describe how they started with a standard Creality Ender 3 and replaced its printhead with a syringe pump held together by 3D printed PETG components.

The pump doesn’t just push out the ink either. It can also retract it between movements, similar to the retraction setting that Ender owners adjust to prevent stringing. Fine-tuning these movements reduced stray bacterial deposits by almost 100-fold. This allows the facility to print what lead researcher Anne Meyer describes as “clear shapes with well-defined edges.”

However, the extra height comes from where the ink is applied. Instead of printing on a bare build plate, the nozzle works in a slurry of tiny gelatin or agarose particles mixed with calcium chloride. The bath helps each layer print while the calcium quickly cures the alginate-based ink. It is essentially the same technique used by Carnegie Mellon’s FRESH method for printing human liver tissue.

In the team’s preprint, a 100-layer structure was nearly 22 mm high, about the width of a U.S. nickel. Nevertheless, the height is sufficient to print hollow cylinders and lattice structures. Meyer points out that hollow shapes provide more surface area for the bacteria inside, allowing them to absorb nutrients and release metabolic byproducts more efficiently.

A gelatin-based version of the slurry allows researchers to remove a finished print directly from the bath. The agarose version, on the other hand, is designed to stay in place and act as an incubator. Previously, printed bacteria began to die after about nine days. In the agarose bath with added nutrients, the team’s E. coli remained alive for four weeks.

For more than a decade, Meyer’s lab has been developing its own bioprinters to create living test structures for research into antibacterial applications and wastewater treatment. She says the longer incubation period could allow researchers to create artificial biofilms – slimy colonies of bacteria that adhere to surfaces – that are more similar to those found in medically relevant environments. Depending on the bacteria they contain, such printed materials could also help purify contaminated water or break down plastic.

The team also published the STL files and G-code on GitHub. Since the system is based on a standard Ender 3, many labs and hobbyists may already have most of the required hardware.

Avatar photo
Written by

Mira Edora

Mira Edora is a writer and contributor at CKSOR, creating clear and engaging articles on current topics, technology, science, lifestyle, and stories of interest to readers. She enjoys researching new developments and presenting useful information in a simple, accessible way. Through her writing, Mira aims to keep readers informed with timely, informative, and easy-to-understand content.

Leave a Comment